192.168.2.1 — Belkin Router Login

192.168.2.1 is the default gateway IP address for Belkin routers. Access your router's admin panel to change WiFi name and password, set up parental controls, configure port forwarding, and manage connected devices.

Access your Belkin router: http://192.168.2.1
Alternative: http://router | Default: (no password)

Default Login Credentials

FieldDefault Value
IP Address192.168.2.1
Username(leave blank)
Password(leave blank)
Note: Belkin routers typically don't require a username or password by default. If prompted, leave both fields blank and click Submit/Login.

How to Login

  1. Connect to your Belkin WiFi network or use ethernet cable
  2. Open any web browser (Chrome, Firefox, Edge)
  3. Type http://192.168.2.1 in address bar
  4. Leave username and password blank
  5. Click Login or Submit

Belkin Router Models

ModelWiFi StandardDefault IP
Belkin N150Wireless N192.168.2.1
Belkin N300Wireless N192.168.2.1
Belkin N450Dual-Band N192.168.2.1
Belkin N600Dual-Band N192.168.2.1
Belkin AC750WiFi 5 (AC)192.168.2.1
Belkin AC1200WiFi 5 (AC)192.168.2.1

What You Can Configure

  • WiFi Name (SSID) — Change your network name
  • WiFi Password — Set WPA2/WPA3 security key
  • Guest Network — Separate WiFi for visitors
  • Parental Controls — Block websites, set schedules
  • Port Forwarding — For gaming and servers
  • MAC Filtering — Allow/block specific devices
  • Firmware Update — Keep router secure

Change WiFi Password

  1. Login to 192.168.2.1
  2. Go to Wireless → Security
  3. Select WPA2-Personal for Security Mode
  4. Enter new password in Pre-Shared Key field
  5. Click Apply Changes
  6. Reconnect all devices with new password

Troubleshooting

ProblemSolution
Page won't loadCheck you're connected to Belkin WiFi
Wrong IPRun ipconfig and check Default Gateway
Password not workingTry leaving it blank or factory reset
Forgot admin passwordFactory reset (hold reset 10-15 sec)

Factory Reset

  1. Find reset button (small pinhole on back)
  2. Press and hold with paperclip for 10-15 seconds
  3. Router lights will blink
  4. Wait for restart (1-2 minutes)
  5. Connect to default Belkin WiFi
  6. Login with blank password