Arris Router Login

Arris Modem Router

Arris login lets you access your modem or gateway's control panel. Many ISPs like Xfinity, Spectrum, and Cox use Arris equipment. Connect to your network, open a browser, and type 192.168.0.1 or 192.168.100.1 to manage WiFi, security, and modem settings.

Access Arris Gateway: http://192.168.0.1
Modem Mode: 192.168.100.1 | Default: admin / password

Default Login Credentials

ModelIP AddressUsernamePassword
Arris SBG6580192.168.0.1adminmotorola
Arris SBG6700192.168.0.1adminpassword
Arris SBG6900192.168.0.1adminpassword
Arris SBG7400192.168.0.1adminpassword
Arris SBG7600192.168.0.1adminpassword
Arris TG1682G10.0.0.1adminpassword
Arris SB8200 (Modem)192.168.100.1adminpassword
ISP-Provided Arris: If your Arris came from your ISP (Xfinity, Spectrum), check the label on the device for login credentials or use your ISP's app.

How to Login

  1. Connect to your Arris WiFi or via Ethernet
  2. Open a web browser
  3. Type 192.168.0.1 in the address bar
  4. Enter username and password
  5. Click Login

Arris Gateway vs Modem

TypeIP AddressExample Models
Gateway (Modem + Router)192.168.0.1SBG6580, SBG7400, TG1682G
Modem Only192.168.100.1SB6183, SB8200, S33

Common Settings

  • Wireless — Change WiFi name (SSID) and password
  • Security — WPA2/WPA3 encryption settings
  • Connected Devices — View all devices on network
  • Firewall — Security and port settings
  • Port Forwarding — For gaming and servers
  • Logs — View connection history

Change WiFi Password

  1. Login to 192.168.0.1
  2. Go to Wireless or WiFi Settings
  3. Find "Pre-Shared Key" or "Password" field
  4. Enter new password (8+ characters)
  5. Click Apply/Save
  6. Reconnect devices with new password

Troubleshooting

ProblemSolution
Can't access 192.168.0.1Try 192.168.100.1 or 10.0.0.1
Login failedTry admin/password, check device label
No internetReboot modem, check cable connection
WiFi not showingCheck if WiFi is enabled in settings

Factory Reset

  1. Find reset button (pinhole on back)
  2. Press and hold with paperclip for 15 seconds
  3. Wait for lights to cycle
  4. Reconfigure with default credentials